Menu
Call (856) 344-1158
Masonry Repair

Chimney Fire Damage Repair Somerdale, NJ

Chimney fire damage in Somerdale is repaired by first finding it with a video inspection, then fixing or relining the flue and replacing any warped metal parts before cracked tiles let the next fire reach the framing. Dial (856) 344-1158 to talk with a local sweep about the damage.

A chimney fire that is still burning calls for 911, not a sweep, and everyone should leave the house. Once the fire is out, the next job is finding out what it did to the chimney. Flue temperatures in a chimney fire can climb far beyond what the liner and masonry were built to handle.

People often expect a dramatic fire, yet a lot of chimney fires go unnoticed. A slow-burning fire can smolder in the flue without anyone in the house hearing it, and the first clue may show up weeks later. Clues include creosote that looks puffed up like a sponge, creosote flakes in the yard, discolored or bent metal at the top and cracked flue tiles.

Under NFPA 211, a chimney fire is one of the triggers for a Level 2 inspection with a camera. A camera can find cracks in the liner along its full length, not just the first few feet. The repair plan comes straight from what that inspection shows.

Many chimney fire damage repair calls in Somerdale also turn up a need for chimney inspection or chimney liner installation.

Need chimney fire damage repair in Somerdale? Call (856) 344-1158 to talk to a local chimney sweep.

Call now
The process

The fire damage repair process

The process moves from cleaning to inspection to repair, in that order.

  1. Keep it out of service

    The fireplace or stove stays out of use until the chimney is cleared. A cracked liner can let the next fire reach the framing.

  2. Clean the flue

    Leftover creosote and debris come out first. Any glazed deposits left behind are noted.

  3. Video inspection

    A Level 2 inspection checks the flue by camera and looks at the chimney from the attic and roof. You can usually watch the footage.

  4. Repair the liner

    A badly damaged flue is relined, most often with stainless steel sized to the appliance. Replacing individual clay tiles inside a standing chimney is rarely practical.

  5. Fix the metal

    The damper, cap and connector pipe are swapped if the heat distorted them. Factory-built chimneys may need sections replaced per the manufacturer.

  6. Confirm the repair

    The technician confirms the system is sound before any fire is lit. Burning dry wood and annual sweeping keep creosote down.

What is included

What fire damage repair covers

Stainless steel liner

The damaged flue gets a new continuous liner with a cap at the top.

Flue cleaning

All remaining deposits are cleared to cut the risk of a second fire.

Brick repair

The outside of the chimney is repointed where heat cracked it along with any scorched flashing.

Post-fire inspection

A thorough look at the whole system after the fire before any repair is planned.

Flue resurfacing

Light liner damage is sometimes restored by coating the inside of the flue if the tiles are still in place.

Related service

Chimney Fire Inspection Somerdale, NJ

Inspecting a chimney after a fire means checking every part the heat could have reached, starting with a video scan of the liner. The scan shows tile cracks, gaps in joints and any spot where heat may have escaped the flue. If the scan raises questions it cannot answer, a Level 3 inspection may be recommended, which can involve opening part of the chimney or wall.

If you are in Somerdale, it helps to mention when the suspected fire happened and what kind of appliance you burn in. Many homeowners policies cover chimney fire damage, and an insurer will usually want a written inspection report. Hold off on any fires until the chimney is cleared.

Local help

Chimney Fire Damage Repair Near Me

Homes around Somerdale that burn wood regularly are the ones most likely to see a chimney fire. Across Somerdale and communities nearby including Magnolia, Stratford, Echelon and Lawnside, a mix of older masonry chimneys and newer stove installations means fire damage can look very different from house to house, and a damaged flue is far better found in an inspection than by the next fire.

Need chimney fire damage repair around Somerdale? Call (856) 344-1158 for a Somerdale chimney sweep who serves the towns around it too.

Chimneys in this climate

Cold winters keep fireplaces, wood stoves and oil burners working for half the year or more. The hardest thing on brick here is not the cold itself but the constant swing above and below freezing: water soaks into brick, mortar joints and the crown on a mild day, freezes overnight and expands, which is how cracks, loose bricks and leaks start. Nor'easters drive rain sideways into flashing and mortar that looked fine in summer. Most homeowners in Somerdale, NJ schedule a sweep in early fall, and a repair check after a hard winter.

Why call

Why fix it now

Smaller repairs

Small chimney problems caught early usually stay small repairs.

Sweeps who know Somerdale

Local sweeps see the same chimney types and weather wear across Somerdale and nearby towns.

Clear next steps

Ask your questions before you agree to anything.

Common questions about chimney fire damage repair

Is it safe to use the chimney after a small chimney fire?
The chimney should stay out of use until it has been inspected, even if the fire seemed small. A single fire can crack flue tiles, and the next fire can then reach the framing through those cracks. Many chimneys can be repaired and put back in service once the damage is fixed.
Why do chimney fires happen?
Most chimney fires start when creosote built up inside the flue catches fire. Unseasoned wood, low smoky fires and skipped cleanings speed it up. Annual inspection and sweeping, as NFPA 211 calls for, are the best prevention.
How do I know if my chimney is on fire?
Chimney fires often sound like a roaring train or heavy popping, and flames or sparks may shoot from the top. If you suspect one, get everyone out of the house and call 911 from outside. Even once it is out, the chimney needs an inspection before another fire.
How do you repair a flue liner after a chimney fire?
That depends on what the camera shows. If clay tiles are cracked, shifted or missing joints in many places, a stainless steel liner is the most common fix. Limited damage in clay tile can sometimes be restored with a resurfacing system instead.
Will homeowners insurance cover chimney fire damage?
Your policy decides that, and the place to start is a call to your insurer. A Level 2 inspection report with camera footage is the kind of documentation an adjuster expects. Talk to the insurer early so the claim matches the repair plan.

More questions? Call (856) 344-1158

Other services that may help

  • Chimney Inspection

    A level 1, 2 or 3 review of the full chimney system to catch cracks, blockages and leaks before they turn into hazards.

    Learn more
  • Chimney Liner Installation

    Putting a new liner in the flue for safer venting and a stronger draft.

    Learn more
  • Creosote Removal

    Removing flaky, crunchy and glazed creosote from chimney flues before it can fuel a chimney fire.

    Learn more
  • Chimney Liner Repair

    Fixing gaps, cracks and missing mortar inside the flue liner with resurfacing, joint repair or partial replacement.

    Learn more

Looking for something else?

See all chimney services

Talk to a Somerdale chimney sweep about chimney fire damage repair

Call (856) 344-1158 for a local chimney sweep in Somerdale and nearby towns.

(856) 344-1158

Free to call. No forms to fill out.

Call (856) 344-1158